CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [SKYACTIV-D 1.5]

id0140q2801600

Continuity Inspection

1.  Verify that the CPP switch is installed properly. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [F65M-R].) (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [F66M-R].)

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3.  Disconnect the CPP switch connector.

4.  Verify that the continuity between CPP switch terminals A and B when the clutch pedal is depressed and when it is released is according to the following table:

am2zzw00011425

•  If not as verified, replace the CPP switch. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [F65M-R].) (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [F66M-R].)