DTC B10DF:46/C1A08:1C/U2007:46/U2007:62/U3000:49 [DSC HU/CM]
id040262905700
|
DTC
|
B10DF:46
|
DSC HU/CM internal malfunction
|
|
C1A08:1C
|
||
|
U2007:46
|
||
|
U2007:62
|
||
|
U3000:49
|
||
|
DETECTION CONDITION
|
• Malfunction detected by self-diagnosis program of DSC HU/CM
|
|
|
FAIL-SAFE FUNCTION
|
Refer to DTC TABLE. (See DTC TABLE [DSC HU/CM].)
|
|
|
POSSIBLE CAUSE
|
• DSC HU/CM internal malfunction
|
|
|
SYSTEM WIRING DIAGRAM
|
—
|
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY DSC HU/CM DTC
• Using the M-MDS, clear the DTC from the DSC HU/CM.
(See CLEARING DTC [DSC HU/CM].)
• Start the engine and drive the vehicle at 10 km/h {6.2 mph} or more.
• Using the M-MDS, perform the DSC HU/CM DTC inspection.
(See DTC INSPECTION [DSC HU/CM].)
• Are any DTCs present?
|
Yes
|
Replace the DSC HU/CM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY NO DTC IS PRESENT
• Are any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
|
|
No
|
DTC troubleshooting completed.
|
||