PID/DATA MONITOR TABLE [INSTRUMENT CLUSTER]


id0902e8960700

—: Not applicable

PID

Unit/Operation

Data contents

Module control terminal

AFS_ST
Off/On
Displays in the M-MDS but it does not operate.
AT_MAN_M_SW*1
Off/On/Reserved/ Unknown
•  Off: M position switch is off.
•  On: M position switch is on.
•  Reserved: —
•  Unknown: M position switch signal is not determined.
1H
AT_S_DWN_SW*1
Off/On/Reserved/ Unknown
•  Off: Down switch is off.
•  On: Down switch is on.
•  Reserved: —
•  Unknown: Down switch signal is not determined.
1G
AT_S_UP_SW*1
Off/On/Reserved/ Unknown
•  Off: Up switch is off.
•  On: Up switch is on.
•  Reserved: —
•  Unknown: Up switch signal is not determined.
1F
BSM/RVM_SW*2
Off/On
•  Off: Blind spot monitoring (BSM) OFF switch is off.
•  On: Blind spot monitoring (BSM) OFF switch is on.
1A, 1V
DSC_OFF_SW
Off/On
•  Off: DSC OFF switch is off.
•  On: DSC OFF switch is on.
1A, 1V
FUEL_GAUGE
L
Displays fuel level detected by the fuel gauge
FUEL_SEN_M
ohm
Displays fuel gauge sender unit resistance valve.
V
Displays in the M-MDS but it does not operate.
FUEL_SEN_S
ohm
Displays in the M-MDS but it does not operate.
V
Displays in the M-MDS but it does not operate.
I_ILLUMI_M
Off (Day)/On (Night)
•  Off (Day): TNS switch is off.
•  On (Night): TNS switch is on.
1B, 1D
I-ST_OFF_SW
Off/On
•  Off: i-stop OFF switch is off.
•  On: i-stop OFF switch is on.
1A, 1V
LDWS_ON_SW*3
Off/On
•  Off: LDWS switch is off.
•  On: LDWS switch is on.
1A, 1V
MULTI_SW_ST
O.K./FAULT
•  O.K.: Cluster switch is normal.
•  FAULT: Cluster switch is malfunctioning.
1A, 1V
ODO_CNT
km, ft, mi
Displays rolling count of the odometer
P_BRAKE_SW
Off/On
•  Off: Parking brake not applied
•  On: Parking brake applied
1X
R_GEAR_SW
Off/On
ATX
•  Off: Selector lever is in other than R position.
•  On: Selector lever is in R position.
MTX
•  Off: Back-up light switch is off.
•  On: Back-up light switch is on.
1B, 1D
R_LMP
Off/On/Unknown/Fault
•  Off: Back-up light is turned off.
•  On: Back-up light is turned on.
•  Unknown: Back-up light signal is not determined.
•  Fault: Back-up light malfunction
1B, 1D
SPEEDOMTR
KPH, MPH
Displays vehicle speed
TACHOMTR
RPM
Displays engine speed
TOTAL_TIME
hh:mm:ss
Displays cumulative elapsed time since vehicle completion
TPMS_CAL_SW*4
Off/On
•  Off: Tire pressure monitoring system (TPMS) set switch is off.
•  On: Tire pressure monitoring system (TPMS) set switch is on.
1A, 1V
VPWR
V
Displays power supply voltage
1S, 1U

*1  :ATX
*2  :With blind spot monitoring (BSM) system
*3  :With lane departure warning system (LDWS)
*4  :With tire pressure monitoring system (TPMS)