DTC C0010:01/C0011:01/C0014:01/C0015:01/C0018:01/C0019:01/C001C:01/C001D:01 [ABS HU/CM]


id040260877200

DTC
C0010:01
ABS HU/CM internal malfunction (LF inlet solenoid valve)
C0011:01
ABS HU/CM internal malfunction (LF outlet solenoid valve)
C0014:01
ABS HU/CM internal malfunction (RF inlet solenoid valve)
C0015:01
ABS HU/CM internal malfunction (RF outlet solenoid valve)
C0018:01
ABS HU/CM internal malfunction (LR inlet solenoid valve)
C0019:01
ABS HU/CM internal malfunction (LR outlet solenoid valve)
C001C:01
ABS HU/CM internal malfunction (RR inlet solenoid valve)
C001D:01
ABS HU/CM internal malfunction (RR outlet solenoid valve)
DETECTION CONDITION
•  Malfunction detected in the ABS HU/CM solenoid valve or internal circuit by the ABS HU/CM on-board diagnostic function
FAIL-SAFE FUNCTION
Refer to DTC TABLE. (See DTC TABLE [ABS HU/CM].)
POSSIBLE CAUSE
•  Solenoid valve in ABS HU/CM malfunction
•  Solenoid valve internal circuit in ABS HU/CM malfunction
SYSTEM WIRING DIAGRAM


Diagnostic Procedure

Step

Inspection

Action

1
VERIFY SOLENOID VALVE OPERATION
•  Using the M-MDS, perform the simulation inspection for solenoid valve.
•  Does the solenoid valve operate?
Yes
Go to the next step.
No
Replace the ABS HU/CM, then go to the next step.
2
VERIFY DTC TROUBLESHOOTING COMPLETED
•  Using the M-MDS, clear the DTC from the ABS HU/CM.
•  Start the engine and drive the vehicle at 6 km/h {4 mph} or more.
•  Gradually slow down and stop vehicle.
•  Using the M-MDS, perform the ABS HU/CM DTC inspection.
•  Is the same DTC present?
Yes
Repeat the inspection from Step1.
If the malfunction recurs, replace the ABS HU/CM, then go to the next step.
No
Go to the next step.
3
VERIFY NO DTC IS PRESENT
•  Are any DTCs present?
Yes
Go to applicable DTC inspection.
No
DTC troubleshooting completed.