SMART CITY BRAKE SUPPORT (SCBS) OFF SWITCH INSPECTION

id041500885600

Note

•  The Smart City Brake Support (SCBS) OFF switch is integrated with the cluster switch.

•  If the Smart City Brake Support (SCBS) OFF switch is replaced, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

Resistance Inspection

1.  Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

2.  Measure the resistance between cluster switches B and C under the following conditions:

Resistance with Smart City Brake Support (SCBS) OFF switch pressed and held (standard)

•  501.44—511.56 ohms

Resistance with any switches not pressed (standard)

•  1,139.99—1,163.01 ohms

am2zzw00011240

•  If not within the specification, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

LED Illumination Inspection

1.  Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

2.  Apply battery positive voltage to cluster switch terminal J, and connect terminal I to ground.

aatjjw00009828

3.  Verify that the LED illuminates.

•  If there is any malfunction, replace the cluster switch.