REAR DOOR LATCH SWITCH INSPECTION
id091400511900
LH
1. Fully close the rear door glass.
2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
3. Remove the following parts:
- (1) Power window subswitch (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION.)
- (2) Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)
- (3) Rear inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)
- (4) Rear door latch and lock actuator (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)
4. Verify that the continuity is as indicated in the table.
-
-
Note
-
• When inspecting the latch side of the rear door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.
RH
1. Fully close the rear door glass.
2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
3. Remove the following parts:
- (1) Power window subswitch (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION.)
- (2) Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)
- (3) Rear inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)
- (4) Rear door latch and lock actuator (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)
4. Verify that the continuity is as indicated in the table.
-
-
Note
-
• When inspecting the latch side of the rear door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.