TUNER AND AMP UNIT (TAU) REMOVAL/INSTALLATION

id092000031200

L.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Front scuff plate (RH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Front side trim (RH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(4)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(5)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(6)  Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)

(7)  Parking sensor control module (with parking sensor system) (See PARKING SENSOR CONTROL MODULE REMOVAL/INSTALLATION.)

(8)  Blower unit (See BLOWER UNIT REMOVAL/INSTALLATION.)

3.  Disconnect the connectors.

am2zzw00009909

4.  Remove the nuts.

am2zzw00008393

5.  Remove the tuner and amp unit (TAU) component.

6.  Remove the screws.

am2zzw00008394

7.  Remove the brackets A and B.

8.  Install in the reverse order of removal.

R.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Disconnect the connectors.

am2zzw00008395

3.  Remove the nuts.

am2zzw00008393

4.  Remove the tuner and amp unit (TAU) component.

5.  Remove the screws.

am2zzw00008394

6.  Remove the brackets A and B.

7.  Install in the reverse order of removal.