BONNET LATCH SWITCH INSPECTION

id091400510600

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the front bumper. (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

3.  Remove the front mudguard (Driver's side). (See MUDGUARD REMOVAL/INSTALLATION.)

4.  Remove the bonnet latch protector. (See BONNET LATCH REMOVAL/INSTALLATION.)

5.  Disconnect the bonnet latch switch connector. (See BONNET LATCH REMOVAL/INSTALLATION.)

6.  Verify that the continuity is as indicated in the table.

Note

•  Inspect the continuity when the bonnet is open and closed.

am3zzw00013548

am2zzw00008333

•  If the operation as indicated in the table cannot be verified, replace the bonnet latch. (See BONNET LATCH REMOVAL/INSTALLATION.)