FRONT DOOR LATCH SWITCH INSPECTION

id091400511400

1. Perform the front door glass preparation. (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the following parts:

(1) Power window main switch (Driver's side)/Power window subswitch (Passenger's side) (See POWER WINDOW MAIN SWITCH INSPECTION.) (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION.)

(2) Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

(3) Front inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)

(4) Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

(5) Front door module panel (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION.)

(6) Front door key cylinder (See FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)

(7) Front door latch and lock actuator (See FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4. Verify that the continuity is as indicated in the table.

am3uuw00009815

am2zzw00007896

• If not as indicated in the table, replace the front door latch and lock actuator. (See FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

Note

• When inspecting the latch side of the front door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.

ac5jjw00000020