DTC B10A5:49 [BCM]
id0902f5067800
|
Description |
Theft-deterrent siren internal malfunction |
|---|---|
|
Detection condition
|
• BCM detects the theft-deterrent siren internal malfunction for 1.5 s or more.
|
|
Fail-safe
|
Not applicable
|
|
Possible cause
|
• Theft-deterrent siren malfunction
• BCM malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY BCM DTCs AGAIN
• Clear the DTC for the BCM using the M-MDS.
(See CLEARING DTC [BCM].)
• Switch the ignition ON (engine on) and wait for 3 s or more.
• Retrieve the BCM DTCs using the M-MDS.
(See DTC INSPECTION [BCM].)
• Is the same DTC displayed?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
2
|
INSPECT THEFT-DETERRENT SIREN
• Inspect the theft-deterrent siren.
• Is the theft-deterrent siren normal?
|
Yes
|
Go to the next step.
|
|
No
|
Replace the theft-deterrent siren, then go to the next step.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the BCM using the M-MDS.
(See CLEARING DTC [BCM].)
• Switch the ignition ON (engine on) and wait for 3 s or more.
• Retrieve the BCM DTCs using the M-MDS.
(See DTC INSPECTION [BCM].)
• Is the same DTC displayed?
|
Yes
|
Replace the BCM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [BCM].)
|
|
No
|
DTC troubleshooting completed.
|
||