PARKING BRAKE LEVER REMOVAL/INSTALLATION
id041200801600
1. Remove the following parts:
- (1) Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION.)
- (2) Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION.)
- (3) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (4) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F65M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F66M-R].)
- (5) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (6) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (7) Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)
- (8) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (9) CD player (with CD player) (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.)
- (10) DVD/CD player (with DVD/CD player) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)
- (11) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)
- (12) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (13) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. After installation, inspect the parking brake lever stroke. (See PARKING BRAKE LEVER INSPECTION.)
|
1
|
Parking brake switch connector
|
|
2
|
Adjusting nut
|
|
3
|
Bolt
|
|
4
|
Clip
|
|
5
|
Parking brake lever
|
|
6
|
Bolt
|
|
7
|
Parking brake switch
|
Bolt Installation Note
1. Temporarily tighten bolt C.
2. Completely tighten the bolts in the order of A, B, and C.
