ANTENNA FEEDER NO.2 INSTALLATION
id092000843600
5HB
1. Align antenna feeder No.2 with the dimension shown in the figure, adhere tape to the tape adhering position of the headliner, and install antenna feeder No.2.
2. Install the following parts:
- (1) Headliner (See HEADLINER REMOVAL/INSTALLATION.)
- (2) C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)
- (3) Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
- (4) Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
- (5) Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)
- (6) Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)
- (7) Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)
- (8) Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION.)
- (9) Lower anchor installation bolt on the rear center seat belt (See REAR CENTER SEAT BELT REMOVAL/INSTALLATION.)
- (10) Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)
- (11) B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)
- (12) Upper anchor installation bolt on the seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (13) Adjust anchor cover (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (14) B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
- (15) Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
- (16) Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (17) Coat hook (See HEADLINER REMOVAL/INSTALLATION.)
- (18) Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)
- (19) Front map light (dual light type) (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)
- (20) Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)
- (21) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
3. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
4SD
1. Align antenna feeder No.2 with the dimension shown in the figure, adhere tape to the tape adhering position of the headliner, and install antenna feeder No.2.
2. Install the following parts:
- (1) Headliner (See HEADLINER REMOVAL/INSTALLATION.)
- (2) C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)
- (3) B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)
- (4) Upper anchor installation bolt on the seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (5) Adjust anchor cover (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (6) B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
- (7) Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
- (8) Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (9) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (10) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (11) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)
- (12) DVD/CD player (with DVD/CD player) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)
- (13) CD player (with CD player) (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.)
- (14) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (15) Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)
- (16) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (17) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F65M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F66M-R].)
- (18) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (19) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (20) Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION.)
- (21) Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION.)
- (22) Coat hook (See HEADLINER REMOVAL/INSTALLATION.)
- (23) Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)
- (24) Front map light (dual light type) (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)
- (25) Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)
- (26) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
3. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
